Buy Low Price From Here Now
Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver
Readmore
Technical Details
- 5-channel 525W powerful surround sound (105W x 5)- 1080p-Compatible HDMI 1.3
- Bluetooth music streaming using Yamaha YBA-10 Bluetooth Audio Receiver
- Connect an iPod using Yamaha YDS-10SL Universal iPod Dock
- XM and Sirius Satellite Radio Ready
See more technical details
By C. Striemer
I'm fairly impressed with the yamaha V465 as an entry level receiver. It has a lot of nice features and all the HDMI and A/V inputs you could want for an entry level receiver...It has a total of nine A/V inputs from the 4 HDMI to the 6 normal A/V inputs which include digital optical for sound. It pushes out a nice 105W per channel so it has plenty of power and it puts out a nice sound. I also have not had any issues with my cable box like others have, and we have Time Warner Digital Cable the HDMI runs from the Box to the receiver to the TV just fine, however that is not my final setup for this and I'll explain below.
I am currently running with Two Polk Audio Monitor 60s for the front and a CS1 for the center and they sound way better than any HTiB i've ever had. I'm not an audiophile but I wanted to upgrade from the whole HTiB craze and this is a great receiver for those who are looking for great sound on a budget.
There are a couple of minor issues however. The biggest for me is that if you have the Digital cable hooked up through HDMI and pass through from the Receiver to the TV, you cannot watch TV and listen to music at the same time. I love watching football all weekend but the commentary can be a bit painful so I like to switch sound to radio or CD. However if you switch inputs on the receiver from the HDMI the cable box is on to the tuner the HDMI signal to the TV is cutoff. To Remedy this I have switched the HDMI from the Cable box to the TV and output the TV sound via RCA cables to a regular A/V input which now allows me to watch TV and listen to music at same time. I will eventually switch to an opitcal audio cable when I have time to pick one up. However the HDMI pass through from Cable to receiver to TV does work when the receiver is off in case you wanted to use the TV speakers when watching instead of the home theater. Which is not an issue either way for me since I listen to HT whenever i watch TV anyway.
The other minor issue I encountered was that radio signals from remotes can get mixed up.. I have a samsung TV and on occaision while changing the input on the TV with the Samsung remote it also changed the current input on the receiver.. it doesn't happen everytime but it is a minor annoyance.
Pros
4 HDMI and 6 A/V inputs
has Pre outs to add an amp.
great value for price
great sound
the 17 different sound styles are nice
has a minor equalizer (can affect treble and Bass) not very complicated
Cons
video pass through does not work when receiver is on and you have a CD player or Tuner as the current input, so Cable must be hooked up to TV if you like to listen to music while watching TV
remote signals can get mixed up.
no upconvert on the video signal so regular DVD, PS2, WII and other NON HD sources will not be upconverted.
Overall though this is a great entry level receiver that for the price could do everything you can ask for.
By Sebastien (Baltimore, MD)
I was looking to buy a home theater that would be audio HDMI friendly (ie compatible with both video and audio streams - in order to simplify connections). Onkyo had some good options, with good ratings, but more expensive. For $350, you will be hard pressed to find a better unit. This receiver really delivers!! I use it in conjonction with a 2.1 theater system by Jamo and a 32inch Sony XBR9.
+ good number of connections: HDMI ports, 2 optical inputs, component video.
+ Audio HDMI
+ good build quality. The unit looks solid
+ complete remote
+ very easy to set up
+ numerous settings and options to tune it.
+ and more importantly, very good and powerful sound. It is perfect for a medium sized living or entertainment room. For bigger setups, you might want to look at more power.
Some "-" points. I do realize that for this price, it is hard to get a better unit, but nonetheless, here's what missing or needs to be improved...
- no VGA port
- no on screen display
- the provided mic for automatic audio set up does not always work
- the remote does not glow in the dark
- some sound presets are simply useless
- no video upconversion.
Overall, a top unit at a fantastic price. Perfect for a budget home theater, with a excellent quality.
By G. Stanfill (LA, CA)
The product is a decent low end AV receiver, with one significant flaw. This is that the turn on code is apparently different than the turn off code, so you can't really use another remote (like FIOS, etc.) to fully control it. A significant annoyance. I was aware of this problem in older units, so I carefully made sure that the remote had only one on/off button, unlike older units. Surprise, this new unit still has the flaw.
But that pales with the way Yamaha treats their customers. If you want ANY product information, you have to join their "club" and get spammed to death. If you want to register your new product, the same. In other works, their marketing department puts collecting sales leads far, far above taking care of their existing customers. #$^%@*(
I really regret not buying another brand.
By Mark A. Porter
I had these goals to satisfy with a new receiver:
Virtual rear speakers:
Rear speakers are a pain to wire and really limit your placement choices. This unit automatically simulates rear speakers when they are not detected via the YPAO auto setup. The quality of virtual rear speakers isn't the same as real speakers, but I found that this didn't diminish the experience, even in movies. There is still a very "open" sound where ambient sounds are non-positional, and some sounds do appear to come from behind.
Compressed Dynamic Range ("Night Mode"):
This is basically the opposite of what most Home Theater folks want. It compresses loud and soft volumes so that when when you turn up the volume to hear the dialog, explosions and orchestra hits don't knock you out of your seat. We do multiple tasks in our great room, and my son stays up late playing video games and watching movies. This feature makes the sound system much less intrusive, and less fatiguing for everyday use. Also a plus if you live in an apartment. Unlike previous Yamaha receivers, you can turn this feature on permanently on a per-input basis
Initial Volume Control:
We watch standard-def and HD TV, DVD movies, HULU, video games and mp3s. These all seem to have wildly varying volume levels. Having the receiver remember the last volume set when it is turned on is not an advantage. This reciever lets you set the initial volume for each input, and limit the maximum and minimum volume levels
Cable consolidation:
We wanted to go completely HDMI. This unit has 4 HDMI inputs and a single output to the TV. All of our devices are HDMI compatible so this really cut down our cable clutter. If you still have non-HDMI sources, consider the RX-V565 which can convert those sources to HDMI. One major caveat: This unit cannot handle optical audio and HDMI video. Your HDMI source must send both audio and video over the HDMI cable. This limitation seems arbitrary and is the reason I'm only giving 4 stars
Remote wrangling:
Most of Yamaha's receiver line now support "scenes". These are 4 dedicated buttons on the Yamaha remote, and the face of the unit, that turn on the receiver, select the audio input, select the video input, and set any DSP settings. This combined with separate buttons for TV control and transport buttons for DVD/DVR control, makes the Yamaha remote a viable universal remote.
Overall I have been rather pleased with this ~$300 receiver, and would definitely recommend it for anyone with a similar set of goals
By Brent Scheffler (Seattle, WA)
I first purchased the RX-V365 for my living room. Being a complete newbie to HD audio, I thought this would be enough. Originally I had all my devices (HDMI) connected to my 37" Samsung TV with a single TOSLINK from the TV back to the receiver. It took about 3 weeks before I realized what was going on: the TV only outputs 2-channel PCM via the TOSLINK when using HDMI. I had to go to Samsung's website and thumb through several FAQ's before I stumbled upon that little bit of info.
After a bit of rewiring the devices to send either TOSLINK or COAX audio to the receiver, I was now finally getting better performance. 1st problem solved. However, I was still underwhelmed with the decoders available, especially with Blu-Ray (which can output Dolby True-HD, DTS-HD, etc.) After further research, Dolby True-HD and DTS-HD can only be sent through an HDMI cable (no TOSLINK or COAX.) Since the RX-V365 does not pass audio through HDMI, I decided to return the RX-V365 and get the RX-V465 instead. 2nd problem solved.
Best decision I have made in quite some time. If you have a 5.1, 6.1, or 7.1 setup and a Blu-Ray player, this receiver is the best "bang for the buck."
My setup:
Samsung 37" LCD
Yamaha RX-V465
Samsung Blu-Ray player
Comcast HD-DVR (Motorola)
Xbox 360 (HDMI version)
Polk Audio 5.1 speaker setup
Images Product
Buy Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver Now
0 comments:
Post a Comment